9. OPERATION
The drive unit for the electromagnet is installed in the bottom frame.
Molded and wired on the printed circuit.
The closing
can be operated using either in AC or DC by the drive unit.
The optional latch trip circuit uses DC as standard.
When a latched contactor is operated using AC power, it is recommended that a
Capacitor trip device be used.
The standard operating voltage is as follows:
Non-latched
energized)
:
V AC
DC
Latched type
AC 00-250V DC
closing voltage
DC
tripping voltage
D i o d e
( L a t c h e d t y p e )
S W I T C H I N G
Fig.3
Internal Configuration of Drive Unit
CAUTION : Do not touch the drive unit without trouble.