background image

2

Reference Selection

Advanced Operation

Basic Operation

Set up

Preparation

Dear Customer

Congratulations! You have purchased one of the finest
Color TV

’s on the market!

This manual will help you use the many exciting and
useful features to make your TV viewing more enjoyable
than ever before.
Before operating your TV set, please read all these safety
and operating instructions completely and then retain for
future reference.

Customer’s Record

You will find the model number and serial number on the
back of your TV set.
Record these numbers in the spaces provided below.
Refer to them whenever you call upon your TOSHIBA
dealer regarding this product.

Model Number

CZ19T31

Serial Number

Safety Precautions

WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

CAUTIONS:
TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED PLUG WITH AN EXTENSION
CORD RECEPTACLE OR OTHER OUTLET UNLESS
THE PRONGS CAN BE FULLY INSERTED INTO
THE OUTLET TO PREVENT ANY EXPOSURE OF
THE PRONGS ON THE POLARIZED PLUG.

ATTENTION:
POUR PRÉVENIR LES CHOCS ÉLECTRIQUES,
NE PAS UTILISER CETTE FICHE POLARISÉE
AVEC UN PROLONGATEUR, UNE PRISE DE
COURANT OU UNE AUTRE SORTIE DE
COURANT, SAUF SI LES LAMES PEUVENT
ÊTRE INSÉRÉS À FOND SANS EN LAISSER
AUCUNE PARTIE À DÉCOUVERT.

Avoid displaying stationary images on your TV screen
for extended periods of time. Stationary patterns generated
by computer displays, video games, stock market reports,
etc. can become permanently engrained on the picture
tube. This damage is not protected by your warranty as it
is the result of misuse. Should you wish to use your
TOSHIBA Television to display still images, it is always
advisable to reduce brightness and contrast settings.
Never leave a computer or video game display unat-
tended.

Note to CATV system installer in the USA:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.

WARNING

AVIS

:

 

RISQUE DE CHOC

ELECTRIQUE-NE PAS OUVRIR

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PER-
SONNEL.

The lightning symbol in the triangle tells you
that the voltage inside this product may be
strong enough to cause an electric shock.
DO NOT TRY TO SERVICE THIS PRODUCT
YOURSELF.

The exclamation point in the triangle tells you
that important operating and maintenance
instructions follow this symbol.

Summary of Contents for CZ 19T31
































Reviews: