1-2-3. Mother PC Board
1. Remove the rear panel. (Refer to item 1-1-4.)
2. Remove the Tuner Unit PC board. (Refer to item 1-2-1.)
3. Remove the Digital PC board. (Refer to item 1-2-2.)
4. Disconnect three connectors (1).
5. Remove five screws (2) and the screw (3).
6. Pull out the Mother PC board (4) toward the rear side (indicated by the arrow).
Fig. 2-1-8
Screws (2)
Screw (3)
Mother PC
board (4)
Connectors (1)
Connector (1)
