1-1-4. Rear Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Remove the screw (1) and seven screws (2).
3. Remove the bush from the rear panel (3).
4. Remove two claws, then remove the rear panel (3).
5. Remove two screws (4), then remove the fan (5).
Fig. 2-1-4
1-1-5. Fan
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off the tape (1).
3. Disconnnect two connectors (2).
4. Remove two screws (3), then remove the fan (4).
Fig. 2-1-5
Screw (1)
Screws (2)
Screws (4)
Fan (5)
Rear panel (3)
Claw
Claw
Bush
Screws (3)
Connectors (2)
Fan (4)
Tape (1)
Hexagonal
nuts
