English
- 19
C
onnections
1
AV2 IN (EXT): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV2 (EXT) jack on the
rear of the DVD Recorder & VCR.
After making this connection, select the source by
pressing the
INPUT SEL.
button for the
AV2
input
sources.
2
By means of RF Cable
After making this connection, you must preset the
station received through the satellite tuner.
RF output channel of the satellite receiver should
be adjusted away from channel 60, which is used
by the DVD Recorder & VCR, e.g. re-adjust to
channel 57.
3
AV1(TV) : By means of 21-pin Scart Cable
Connect the end of the SCART cable to the
AV1(TV) jack on the rear of the DVD Recorder &
VCR. Plug the other end into the appropriate con-
nector on the television.
❚
Case 2 : Connecting DVD Recorder &
VCR to a Satellite Receiver or
Other Equipment
You can connect your DVD Recorder & VCR to a
Satellite receiver or other DVD Recorder & VCR using
the SCART cable if the appropriate outputs are
available on the equipment chosen.
The following illustrations give a few examples of the
connection possibilities.
1
AV1 (TV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV1 (TV) jack on the rear
of the DVD Recorder & VCR.
After making this connection, select the source by
pressing the
INPUT SEL.
button for the
AV1
input
sources.
2
By means of RF Cable
After making this connection, you must preset the
station received through the satellite tuner.
RF output channel of the satellite receiver should
be adjusted away from channel 60, which is used
by the DVD Recorder & VCR, e.g. re-adjust to
channel 59.
VR25SB-1-eng 5/6/05 5:33 PM Page 19