![background image](http://html.mh-extra.com/html/toshiba/d-vr30sg/d-vr30sg_owners-manual_426559032.webp)
❚
Digital Output
•
PCM
:
Converts to PCM(2CH) 48kHz
audio. Select PCM when using the
Analog Audio Outputs.
•
Bitstream
:
Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when
using the Digital Audio Output.
❚
DTS
•
Off
: Doesn’t output digital signal.
•
On
: Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS
Decoder.
❚
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
•
On
: When Movie soundtracks are played at low
volume or from smaller speakers, the
system can apply appropriate compression
to make low-level content more intelligible
and prevent dramatic passages from getting
too loud.
•
Off
: You can enjoy the movie with the standard
Dynamic Range.
Note
Note
When DTS soundtrack is played, sound is not
output from Analog Audio Output.
Be sure to select the correct Digital Output or
no audio will be heard.
32 -
English
S
ystem Setup
Setting Up the Audio
Options
Allows you to setup the audio device and sound status
settings depending on the audio system in use.
1
With the unit in Stop mode/No Disc mode, press
the
MENU
button.
2
Press the
…†
buttons to select
Setup
, then press
the
OK
or
√
button.
3
Press the
…†
buttons to select
Audio
, then press
the
OK
or
√
button.
Audio setup menu will be displayed.
4
Press the
…†
buttons to select the desired audio
option, then press the
OK
or
√
button.
5
Press the
…†
buttons to select the desired item,
then press the
OK
or
√
button.
Note
■
Press the
RETURN
or
œ
button to return to the
previous menu. Press the
MENU
button to exit
the menu.
No Disc Setup
System
√
√
Clock Set
√
√
Install
√
√
Language
√
√
Audio
√
√
Video
√
√
Parental Control
√
√
MOVE
OK
RETURN
EXIT
Programme
Setup
No Disc Audio
Digital Output
: PCM
√
√
DTS
: Off
√
√
Dynamic Compression
: On
√
√
MOVE
OK
RETURN
EXIT
Programme
Setup
VR30SG-eng-1 6/10/05 4:05 PM Page 32