Toshiba D-VR4 Owner'S Manual Download

Page: 85 / 88

Additional information

Check the disc space.

Load a recordable disc.

RAM Disc:
Turn the protect switch to OFF on
the cartridge itself.
Or turn OFF the protect from Disc
Setup.

Undo finalization or load another
disc for recording.

Load another disc for recording.

SYSTEM ERROR
PLEASE WAIT

SYSTEM ERROR
PLEASE WAIT
DISC CHECKING

SYSTEM ERROR
DISC MIGHT BE FAILED
PRESS ENTER/SELECT

NO DISC

REGION CODE ERROR

INCORRECT DISC - C104, C105,
C106, C107

NO DISC

PROCESSING
PLEASE WAIT

RECORDING INTERRUPTED -
C204

CANNOT RECORD - C203

CANNOT RECORD - C206

CANNOT RECORD, DISC PROTECTED

CANNOT RECORD - C208

CANNOT RECORD - C209

CANNOT RECORD - C210

DISC ERROR - C205, C211, C212,
C213
CANNOT RECORD, EXCEEDS
LIMITED NUMBER OF TITLES
CANNOT RECORD, EXCEEDS
LIMITED NUMBER OF CHAPTERS
CANNOT RECORD
PROTECTED IMAGE
RECORDING INTERUPTED
PROTECTED IMAGE
CANNOT RECORD IN VIDEO MODE.
COPY IMAGE ONCE ONLY.
CANNOT RECORD ON DISC.
THIS IS NOT CPRM DISC.

SWITCHING TO INTERLACE OUT-
PUT FOR COPYING

CANNOT COPY DATA - C251

CANNOT COPY DATA - C254, C255

COPYING INTERRUPTED

DISC ERROR - C302, C303

DISC ERROR - C304, C305

DISC ERROR - C306

DISC ERROR - C307, C308

CANNOT EDIT

CANNOT EDIT - C408

PROCESSING
PLEASE WAIT

Power ON

Playback

Recording

Dubbing

Disc setup

Title Menu

Error/Warning message list

ERROR/WARNING MESSAGE

CAUSE

POSSIBLE SOLUTIONS

PAGE

NOTE:

Any error/warning message other than those above might appear. Take measures against such a mes-
sage by seeing the possible solutions above.

The power was shut down without completing the
termination process due to a power failure or dis-
connection of the AC cord plug. (Abnormal termi-
nation)

The power was abruptly turned off before writ-
ing to the disc was completed.

The data restoration was completed.

When a disc was not loaded in the unit,

PLAY

was pressed.

A disc specified other than “Region 1” or “Region
ALL” was loaded.

The disc cannot be identified.

When a disc was not loaded into the unit,

REC/

OTR

was pressed.

The recording termination is processing.

Disc became full during recording.

Recording was tried onto the disc having no space.

Recording was tried onto the disc which does not
support recording.

Disc erase-protection is applied.

Recording was tried onto the finalized disc.

Adding data was tried onto the disc recorded in
the other unit.
Adding data was tried to the disc where PC data
was recorded.

Wait until the message disappears.

The data is now restoring.

Press

ENTER

, then the screen re-

turns to the normal display. The data
may not be restored even if the res-
toration process is performed.

Load a disc.

A disc specified other than “Region
1” or “Region ALL” cannot be played
back.

Check the disc and load a proper
disc.

Load a disc.

Wait until the process is completed.

Erase unnecessary titles or load
another disc and restart recording.

Combining chapters cannot be performed.

A process requiring a longer time such as edit-
ing is being performed.

Chapter marks that have been
added automatically in the erasing
of a scene procedure cannot be
erased.

Wait until the process is complete.

A scratch or contamination was found on the disc.

99 titles were recorded on the disc.

999 chapters exist on the disc.

Recording was attempted on a copy protected
video.
The video was changed to a copy-guard format
in recording.

Recording was attempted of a “Copy Once” program
onto a disc (Video mode).
Recording was attempted of a “Copy Once” program
onto a disc without CPRM.

Dubbing was initiated from a disc to a video tape
in the progressive scan mode.

No video tape or disc is inserted as a source for
the recording.

The source video or disc to be copied is copy-
guarded.

The video tape or disc became full during dubbing.

Cannot Format disc due to a scratch or contami-
nation on the disc.

Cannot Finalize disc due to a scratch or con-
tamination on the disc.

Cannot Undo Finalize disc due to a scratch or
contamination on the disc.

Cannot Protect disc ON/OFF due to a scratch
or contamination on the disc.

Editing cannot be performed due to a scratch or
contamination on the disc.

Check the disc and reload it, or use
another disc for recording.
Erase unnecessary titles or load
another disc.

Erase unnecessary chapters or
load another disc.
You cannot record a copy protected
video.

You cannot record a copy protected
video.
Load a DVD-RW Ver. 1.1 or later
(VR mode) with CPRM.
Load a DVD-RW Ver. 1.1 or later
(VR mode) with CPRM.

The mode is automatically changed
to interlaced mode if dubbing from
a disc to a video tape.
Load a video tape or disc into the
source drive.

You cannot dub a video containing
copy-guarded material.

Load another video tape or disc for
recording and restart.

Check the disc and reload it, or use
another disc for recording.

77, 78

2G10101A P80-P85

2/25/05, 1:32 AM

Summary of Contents for D-VR4

























































































Search results

Summary of Contents for D-VR4

Reviews:

Related manuals for D-VR4

Brands by name

Popular brands

Toshiba D-VR4, Owner'S Manual

Search results

Summary of Contents for D-VR4

Reviews:

Related manuals for D-VR4

Brands by name

Popular brands