DeviceNet Module Installation and Operation Manual
11
Communications Parameters
The ASD (including the DEV002Z) acts as a follower device on the network. Use the parameters listed
below to set the communication options.
These settings can also be made by the use of configuration tools and the Electronic Data Sheet (EDS)
file. The EDS file can be downloaded from the Toshiba web site:
http://www.toshiba.com/ind/downloads_main.jsp
.
1 – See
Assembly Object – F830 Instance Details on pg. 21
Note:
When Communications parameters are changed either the power to the ASD must be
cycled, or F899 set to 1 and a Reset command received via the communications link,
for the changes to take effect.
Note:
When either F003 or F004 is set to Communication Input, the ASD operates without
Net Ref (Frequency Link) or Net Ctrl.
F830: Communications Option (DeviceNet/Profibus) Setting 1 — The Input/Output Instance of
DeviceNet card is set up at this parameter.
The DeviceNet card supports both the standard DeviceNet AC Drive profile Instances 20/70, 21/71 and
user-defined Instances 100/150, 101/151, and 102/152.
Parameter
Function
Adjustment Range
Default
Setting
F830
1
Communication Option (DeviceNet/
Profibus) Setting
0:
1:
2:
3:
4:
5: –
6: –
7. –
0
F851
ASD Operation at Disconnect
(Action to be carried out in the event
of communications loss)
0: Stop and Terminate Communications
1: Do Nothing (continue programmed operation)
2: Deceleration Stop
3: Coast Stop
4: Emergency Off
5: Preset Speed (Operates at the Preset Speed operation
frequency set with F852)
0
F852
Preset Speed Operation Selection
0: Disabled, 1 to 15: Preset Speed number
0
F853
Communications Option Station
Address Monitor
Displays the MAC ID number assigned using the dip
switch to set a decimal equivalent range of 0 to 63
0
F854
Communications Option Speed
Switch Monitor DeviceNet/
CC-Link
Displays the network communication speed set with the
dip switch
0: 125 kbps
1: 250 kbps
2: 500 kbps
0
F899
Network Option Reset Settings
0: Reset ASD only
1: Reset the DEV002Z and the ASD (see Notes below)
0
Summary of Contents for DEV002Z
Page 1: ...Installation and Operation Manual ASD OPTIONAL DEVICENET MODULE ...
Page 2: ......
Page 55: ......
