135
Q u e s t i o n s A b o u t D V D s a n d C D s
9
• Remove the disc and clean it. Do not use discs that are damaged.
• Check that the disc has a region code compatible with the DMS. If one of the regional codes on the disc does not match the number
on the back panel of the DMS (region code 1), the disc cannot be played. Discs marked ALL will play in any DVD player.
Regional restriction codes are built-in to DVD players and DVDs for each sales region.
• There may be condensation in the player. Allow time for condensation to evaporate. Leave the DMS for an hour or so, then try again.
If the DMS is near an air-conditioning unit, you should move it.
The Digital Media Server is not playing audio on a DVD.
• If playing a DTS DVD, the DMS must be connected to a DTS Receiver to receive audio.
The DVD did not record successfuly.
• Check whether the source that you are trying to record is copy protected. You cannot record copy-protected material using this DMS.
For more information, see “Compatibility and Copy Protected Material” on page 48.
• Check that there wasn’t a power outage during the recording.
I can’t play a DVD disc that I recorded using my Digital Media Server in another DVD player.
• Not all DVD players will play all discs, even if the disc has been finalized.
