background image

Preface    3

Preface

Thank you for purchasing TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems. This 
guide describes instructions on how to print with the Mopria Print Service function. Read this manual before using the 
functions.

How to read this manual

Symbols in this manual

In this manual, some important items are described with the symbols shown below. Be sure to read these items 
before using this equipment.

About the target of this manual

This is a manual that is aimed at general users and administrators.

Screens and Operation Procedures

This manual shows the screens and describes the operation procedures in Android 5.0. The details on the screens may 
differ depending on the status such as the model of the used equipment, the installed options, the OS version and the 
applications.

Trademarks

For trademarks, refer to the Safety Information.

Indicates a potentially hazardous situation which, if not avoided, could result in death, 
serious injury, serious damage, or fire in the equipment or surrounding assets.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or 
moderate injury, partial damage to the equipment or surrounding assets, or loss of data.

Indicates information to which you should pay attention when operating the equipment.

Describes handy information that is useful to know when operating the equipment.

Pages describing items related to what you are currently doing. See these pages as required.

Summary of Contents for DP-2008A















Reviews: