1600/2000/2500 ADJUSTMENT ITEMS
1 - 56
December 2000 © TOSHIBA TEC
1.4.2 Printer unit adjustment
a) Polygonal motor 600 dpi (Primary scanning reproduction ratio of the printer unit)
(1) Set 0 for codes 430 to 433 of the margin setup in 05: Adjustment mode.
(2) Make a test print and adjustment as in the following procedure.
(3) Measure the distance "A" which is the distance between the 5th line and 15th line from the left side of
the test print paper against the direction of the paper movement.
(4) In order to set the distance "A" to 100 mm.
Notes:
1. A decrease in the value lengthen the distance "A". (0.2 % step)
2. Adjustment value is effective within the range of 108 - 148.
The default adjustment value is 128.
01-04-03
Print movement direction
15
5
1
A
*
#
*
*
After 3 sec.
Enter SERVICE MODE
1
4
2
(Code)
SET
05:TEST MODE
Power ON
0
5
INTERRUPT
PROGRAM
04:FUNCTION TEST
SET
02:PRINT TEST
SET
START
SET
Power OFF
C/S
SET
1
(Cassette)
(Print end)
OK
NG
START
MAIN MENU
Digital Keys
SET
(Code)
INTERRUPT
4
0
0
or
(Set the value)
START
SET
or
