Toshiba DST-3000 High Definition Digital Receiver
Page 7-10
could be the kids’ channels, and
Family
could be all channels that Mom and Dad have deemed
appropriate for the entire family. Each of the lists, with the exception of
Family,
can be renamed.
Note: Remember that when the DST-3000 receiver is locked, only channels
selected in the Family list can be viewed. This means that even though a
channel appears on the Fav. A, Fav. B, Fav. C, or All Channels list, the
selected channel must also be on the Family list in order to view it.
Note: For the Family list limit to be in force, the DST-3000 receiver must be
locked.
On the left of the
CHANNEL LISTS
screen are buttons for Done, Video, AutoSet, Rename,
Clear, and Set, which are explained below:
Done
Highlighting the
Done
button on the screen and pressing the
key on the remote control
causes an exit from the
CHANNEL LISTS
screen and a return to the
SETUP
screen
.
Video
Highlighting the
Video
button on the screen and pressing the
key on the remote control
will return you to the last program you were viewing.
AutoSet
AutoSet
is designed to help in the initial programming of your channel lists. When you select the
AutoSet
button, a pop-up menu appears showing each of the channel lists. Highlight and select a
channel list to be programmed. Once selected, the AutoSet Progress pop-up status panel appears.
It will take several minutes for the DST-3000 receiver to scan through all channels and determine
which ones you are authorized to receive. The results of this scan will be stored in the designated
channel list.
Note: The AutoSet Channel Scanning Process can inadvertently exclude some
channels (such as the MUSIC CHOICE channels) or include some Pay Per
View channels. You can manually edit your channel lists after AutoSet is done
(see “Tag Boxes” below).
Rename
When you highlight the
Rename
button and press the
key, a Rename List pop-up menu
appears. You can choose any of the first three lists to be renamed. The
All
and
Family
lists cannot
be renamed. Once you have selected a list, a Rename List entry keyboard pop-up panel appears.
You can highlight the desired letter using the , , , and keys. Press
to enter the letter.
When you have finished, choose
OK
.
Clear
You may decide to remove all channels from a particular list later on. Selecting
Clear
will allow
you to clear all channels from a chosen list. You may then add channels back in.
Set
If you decide to include all channels in a particular list, selecting
Set
will allow you to specify the
list. You may then remove channels from this list, if you so choose (see “Tag Boxes” below).
SELECT
SELECT
SELECT
▲
▲
▲
▲
SELECT
Summary of Contents for DST-3000
