1-12-3
E9TK5FIS
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error
messages (error number: 1 to 39, 43 to 46 and 51) is displayed on the recording menu after timer recording.
(Once the screen of the program line is exited, the program line for the error will be cleared.)
(No Error Message is displayed for the error No. 40 ~ 42.)
This disc is protected and not
recordable.
Release the disc protect
setting in the Disc Setting
menu.
29
Disc Protected Disc.
Disc is full.
(No area for new recording)
Insert the recordable disc with
enough recording space.
30
No available recording space.
You cannot record more than
99 titles on one disc.
(The maximum is 99.)
Delete unnecessary titles.
31
The 99 titles limit has been reached.
(Video Format Disc)
32
The 99 titles limit has been reached.
(VR Format Disc)
You cannot record more than
999 chapters on one disc.
(The maximum is 999.)
Delete unnecessary chapters.
33
The 999 chapter limit has been reached.
(VR Format Disc)
You cannot record on this disc
as Control Information is full.
Insert a new disc.
34
No available recording space for control
information.
You cannot record on the disc
as Power Calibration Area is
full.
Insert a new disc.
35
PCA is Full. (in REC start)
This disc is already finalized.
Release the finalizing for this
disc.
36
It is finalized. (Video Format Disc)
Can not record on this disc.
Repeat the same operation.
37
Access to Memory Area range outside.
38
Sector Address is wrong.
39
BUP writing error of chapter editing.
You cannot record more than
49 titles on one disc.(The
maximum is 49.)
Delete unnecessary titles.
43
The 49 titles limit has been reached.
(+VR Format Disc)
You cannot record more than
254 chapters on one disc.(The
maximum is 254.)
Delete unnecessary chapter
marks.
44
The 254 chapter limit has been reached.
(+VR Format Disc)
This program is not recordable
in +VR mode.
You cannot record copy-
prohibited programs.
45
During the CGMS picture input (+VR
Format Disc).
The disc has no recording
compatibility. Set “Make
Recording Compatible” to
“ON” to convert the disc.
Set “Make Recording
Compatible” to “ON” to convert
the disc.
46
Trying to record onto the +VR formatting
disc that had been recorded by the other
recorder when “Make Recording
Compatible” setting is “OFF”.
This Program is not allowed to
be recorded.
Receive PAL/SECAM signal.
51
When you receive signal other than PAL/
SECAM.
Message
Solution
Error
No.
Error Description
A program with the error number is grayed out on the timer programming list.
Error number
