Instruction
Prohibit
Instruction
Prohibit
English
Disconnect
power plug
No touch
by wet
hand
Electric
shock
No
dis-assembly
and repair
without
permission
No water
spraying
Away from
flammable
materials
Wipe
off dust
Before cleaning or maintaining the dishwasher, disconnect the power plug first.
Do not connect or disconnect the power plug by wet hand.
This may cause electric shock or fault and cause injuries.
Do not use damaged power lines, power plug or loose power socket.
This may cause electric shock or fault, and cause injuries or fires.
Do not damage power line.
Do not damage, cut, process power line or bend, pull, twist or bind power line.
Besides, do not yank the metal part of the power line, or put weights on the line
or clamp the power line.
The power line may be damaged and cause fire or electric shock. If the
power line is damaged, the damaged line must be replaced by the manufacturer
or its service agent or personnel having similar qualificarion, so as to prevent
dangers.
Do not spray water directly onto the parts of the main body of the dishwasher.
This may cause accidents of electric shock or short circuit.
Do not put flammable materials into the dishwasher.
Do not put flammable materials of kerosene, gasoline, volatile oil, diluent, ethyl
alcohol etc. as well as dishes having such matters into the dishwasher.
It will may cause explosion or fire.
Wipe off dust or dirt accumulated on the plug of power line.
The accumulated dust or dirt may cause fire.
Do not touch the inside of the cabinet, steam jets for during operation or
30 minutes after operation.
There is a fear of burning.
Take out the dishes, clean filters, handle it more than 30 minutes after operation.
There is a fear of burning.
Do not use extension cord.
It may cause fire due to heat.
It there is abnormality such as the spray arm is not moving, smoke or strange smell,
immediately unplug the power plug and stop using the dishwasher.
Please ask the agent you purchased for inspection/repair. There is a danger of
electric shock, fire by electric leakage or short-circuiting.
03
