Problem
Possible cause
Solutions
Noise from
dishwasher
Suspend the program and reposition the
dishes.
Dishes are loose.
Glassware is not
glossy
If soft water is used, use less powder and
select a shorter washing program to clean
the glassware.
Add too much dishwashing
powder under soft water
conditions.
Black or grey
imprints on dishes
Use mild detergent to eliminate these
imprints.
Friction between aluminum
utensil and dishes.
Dishes are not
completely dry
Placement is improper.
Do not take dishes out immediately after
the program ends. Slightly open the door
let the vapor out and wait until dishes are
cool.
Dishes are taken out too
early.
When shorter washing procedures are
used, washing temperature is lower and
program shall be selected.
Program is wrong.
These dishes have poor drainage ability,
which are not suitable to be washed in
dishwasher.
Dishwashing
powder remains in
adding position
Place the dishes correctly.
Placement of dishes
hinders the addition of
dishwashing powder.
White point on
dishes or
glassware
Add dishwashing powder.
Hard water produces more
scale.
Dishes remain
dirty after
washing
Please see “
Install dishwasher bowl basket
”
information
for
details (Page
22
).
Dishes are not placed
correctly.
Select a more powerful program.
The program is not
powerful enough.
Use more dishwashing powder or replace
new detergent.
Dishwashing powder is
not enough.
Reposition the dishes so that spray arm
can rotate freely.
spray arm.
the rotation of spray arm.
Filter assembly is dirty or
not properly installed on the
base, which may impede
the rotation of spray arm.
Beats in water
pipe
In case of any doubts, please contact
This may be caused by site
installation or cross section
The dishes have poor
drainage ability.
Please see “Install dishwasher bowl basket”
information for details (Page 22).
English
33