dynadock™ User’s Manual
45
2
Select “Eject and Sleep” from the menu.
(Sample Image) Eject and Sleep screen
3
Wait before removing the dynadock from the system.
(Sample Image) Undocking screen
4
If the dynadock is removed from the system successfully, the
icon in the system tray will disappear. Disconnect the USB cable
from your computer’s USB port.
5
After that, the system will go into sleep mode.
It is important that you correctly disconnect the dynadock by following
the steps above. Failure to do so may cause data loss and/or damage
to your computer and devices connected through the dynadock.
Eject by use of command line
You can run dynadock Utility by command line, please follow the
steps below:
1
Click
Run
...
on
Start menu
.
2
Input
“C:\Program Files\TOSHIBA\dynadock
Utility\TOSUSBSvrCtrl.exe” /eject
, and run the
program.
CAUTION
