8-3
e-STUDIO161 USER PROGRAMS
2. Setting the user programs
1) Hold down the [Light] key (
) until the alarm indicators
(
, , , , )
blink.
•"- -" appears in the display.
2) Enter the program number with the numeric keys.
•See "USER PROGRAMS" for the program numbers.
•The selected program number blinks.
•To select "Auto clear timer", press the [1] key.
Note:If you enter the wrong number, press the [CLEAR] key (
) and
then enter the correct number.
3) Press the [START] key (
).
•The selected program number stops blinking and lights steadily.
•The currently selected setting code blinks in the 1st digit of the
display.
4) Enter the desired setting code by pressing a numeric key.
•For the setting codes, see "USER PROGRAMS".
•The selected setting code blinks.
•To select 90 seconds, press the [5] key.
Note:If you enter the wrong number, press the [CLEAR] key (
) and
return to step 2).
5) Press the [START] key (
).
•The selected setting code stops blinking and lights steadily.
Note:To select a setting for another user program, press the [CLEAR]
key (
) and then return o step 2).
6) Press the [Light] key (
) to complete the settings.
•The alarm indicators (
,
,
,
,
) go off and the display
returns to the number of copies display.
1 3 5
RE D END
START
START
[08]USERPROGRAMS.fm 3 ページ ２００４年１月１３日 火曜日 午後１２時１２分
