Repair Information
4-5
e-STUDIO 16P
High Voltage Power Supply (HVPS) Removal
igh Voltage Power Supply (HVPS) Removal
HVPS) Removal
1. Open the front cover. See
“Front Cover” on page 4-2
for more
information.
2. Remove the top cover. See
“Top Cover” on page 4-2
for more
information.
3. Remove the left side cover. See
“Left Side Cover” on
page 4-3
for more information.
4. Remove the four HVPS board screws.
ur HVPS board screws.
5. Disconnect connector from the HVPS board.
6. Remove the HVPS board.
ve the HVPS board.
Note: Use care with compression springs as they can fall out.
ut.
Cooling Fan Removal
Fan Removal
1. Open the front cover. See
“Front Cover” on page 4-2
for more
information.
2. Remove the top cover. See
“Top Cover” on page 4-2
for more
information.
3. Remove the left side cover. See
“Left Side Cover” on
page 4-3
for more information.
4. Remove two cooling fan screws.
5. Remove the toner cartridge.
6. Tilt the printer carefully to the rear so it is resting on the ASF.
7. Remove the four bottom cover screws.
bottom cover screws.
8. Disconnect the cooling fan cable from the engine card.
9. Remove the cooling fan.
Low Voltage Power Supply (LVPS) Removal
Supply (LVPS) Removal
1. Remove the toner cartridge.
2. Tilt the printer carefully to the rear so it is resting on the ASF.
y to the rear so it is resting on the ASF.
3. Remove the four bottom cover screws.
4. Disconnect the cables.
5. Remove four LVPS board screws.
Summary of Contents for e-STUDIO 16P
