e-STUDIO202S DISASSEMBLY AND ASSEMBLY 8 - 9
12) Remove the pressure release levers on the right and the left
sides.
13) Remove the pressure roller, the pressure bearing, and the
spring.
Note: Apply grease to the sections specified with an asterisk (
∗
).
Grease: "JFE552"
Heat roller disassembly
(Continued from procedure (4).)
5) Remove screws, remove the fusing cover, and open the heat
roller section.
6) Remove the C-ring and the fusing bearing, and remove the
heat roller.
7) Remove the parts from the heat roller.
Note: Apply grease to the sections specified with
∗
1.
Grease: "JFE552"
1)
1)
1)
2)
2)
1)
3)
3)
Pressure roller
1)
2)
2)
3)
3)
1)
2) 3)
Heat roller
3)
2)
1)
1
1
2
Apply grease "GU-2"
to the fusing gear surface
∗
2.
