manualshive.com logo in svg

Toshiba e-studio 211c, Operator'S Manual

Introducing the Toshiba e-studio 211c - a versatile office solution that combines efficient printing, scanning, and copying capabilities. Enhance your productivity with this reliable device. Access the comprehensive Operator's Manual on our website, where it can be easily downloaded for free. Experience seamless operations with Toshiba!

Share
Download
background image

1

2

3

4

5

6

7

8

9

10

11

12

4

PREFACE (Cont.)

Features of the e-STUDIO211c/311c

The e-STUDIO211c/311c is a digital color copier employing a 4-step tandem copy process, which is
capable of high-speed full-color copying.  The e-STUDIO211c/311c incorporates a display with a touch
panel and menu keys that graphically represent copier functions.  As a result, anybody can make clear-
looking copies quickly and easily.
The e-STUDIO211c/311c also has the following convenient features, functions and options.

The full-color copying speed is 21 copies (LT) per minute for the e-STUDIO211c, and 31 copies (LT)
per minute for the e-STUDIO311c.
The resolution of both scanning and reading realizes a high-quality full-color image with 600dpi
and 256 shades of gradation for each color by the proprietary 4 beam laser unit.
The 9.5 seconds for the first copy output marks the fastest speed among copiers of a similar class.
You can make copies pleasantly in no time.
The warm-up time is drastically shortened to approximately 4 minutes (about half of that of the
Toshiba copiers FC15/22).
Electronic sorting improves both color and black-and-white copying productivity.
OHP film feeding is available from the drawer.
Comes with rich editing functions such as trimming, masking and image repeat.
Loading the page memory and hard disk as standard equipment enables 2 in 1 / 4 in 1, electronic

sorting and magazine sorting, etc.

A fixing system with less oil reduces the amount of oil stuck to the paper and consequently produces
OHP-film copies of good permeability.
Just by simply replacing the cartridge, you can add  toner and you do not soil your hands.  Since the
paper is fed in straight, any paper jams can be cleared easily.
A wide variety of media from thin paper (17lb.) to thick paper (104lb.cover), sticker labels, OHP films,
etc. is acceptable.
A wide range of paper sizes from ST-R to Full Bleed (12”x18”) is acceptable.

The image quality technology offers up to 999 successive stable copy images.
The Advanced Image Enhancement mode automatically analyzes an original which has mixed text,

illustrations and photographs, and reproduces an optimal image with the optional AI board installed.
Installing an optional finisher offers quick sorting such as stapling, magazine sorting and hole
punching (optional) of copies automatically.
Installing a finisher with an optional saddle stitching function attached allows you to select the
saddle stitching mode which will automatically staple the center of the document just like a book.
Two types of controllers (optionaI) can be connected to the copier externally or internally in order to
make printers and scanners available.
Comes with the ‘energy saving mode’ which can lower the fuser temperature to save the power
consumption while the copier is not being used.  The ‘off-mode’  will automatically turn the copier off
when it is not used for a specified period of time, and the ‘sleep mode’  can maintain the minimum
power consumption when the optional printer is in use (waiting) while the copier is not being used.

Summary of Contents for e-studio 211c


































































































































































































































Reviews:

No comments

Related manuals for e-studio 211c

IBM 3160 Introduction And Planning Manual preview
3160
Brand: IBM Pages: 102
AM TECH mobile pro advance User Manual preview
mobile pro advance
Brand: AM TECH Pages: 16
Oki OkiPos 407II Installation Manual preview
OkiPos 407II
Brand: Oki Pages: 8
Tascam P11/TAS Technical Documentation preview
P11/TAS
Brand: Tascam Pages: 2
Kashino Technology CSN-A1K User Manual preview
CSN-A1K
Brand: Kashino Technology Pages: 72
CognitiveTPG A798II Setup Manual preview
A798II
Brand: CognitiveTPG Pages: 2
Pantum P3020 Series User Manual preview
P3020 Series
Brand: Pantum Pages: 95
Xerox 2045e Operating Instructions Manual preview
2045e
Brand: Xerox Pages: 78
Fujitsu DL2600 User Manual preview
DL2600
Brand: Fujitsu Pages: 126
Fujitsu C145-C037-01EN Product Description preview
C145-C037-01EN
Brand: Fujitsu Pages: 123
Fujitsu Breeze 100 User Manual preview
Breeze 100
Brand: Fujitsu Pages: 146
Fujitsu 10 ppm User Manual preview
10 ppm
Brand: Fujitsu Pages: 146
Fujitsu DL2400 User Manual preview
DL2400
Brand: Fujitsu Pages: 182
Fujitsu 628WSL110H2 User Manual preview
628WSL110H2
Brand: Fujitsu Pages: 40
Fujitsu 16DV Parts Catalogue preview
16DV
Brand: Fujitsu Pages: 39
Fujitsu DL7600 Brochure & Specs preview
DL7600
Brand: Fujitsu Pages: 2
Fujitsu 16DV Technical Specifications preview
16DV
Brand: Fujitsu Pages: 2
Fujitsu DL Series Driver Installation preview
DL Series
Brand: Fujitsu Pages: 24

Brands by name

Popular brands

Load more brands