© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 169
2
481
Paper
feeding
Automatic change of paper
source
PPC
1
<0-2>
SYS
Sets whether or not
changing the drawer
automatically to the
other drawer with the
paper of the same size
when paper in the
selected drawer has run
out.
0: OFF
1: ON (Changes to the
drawer with the
same paper direc-
tion and size: ex. A4
to A4)
2: ON (Changes to the
drawer with the
same paper size.
Paper with the dif-
ferent direction is
acceptable as long
as the size is the
same: ex., A4 to A4-
R, LT-R to LT. “1” is
applied when the
staple/holepunch is
specified.)
1
482
Paper
feeding
Feeding retry setting
ALL
0
<0-1>
M
0: ON
1: OFF
1
483
Laser
Pre-running rotation of
polygonal motor
ALL
0
<0-2>
SYS
Sets whether or not
switching the polygonal
motor from the standby
rotation to the normal
rotation when the origi-
nal is set on the RADF
or the platen cover is
opened.
0: Valid (when using
RADF and the origi-
nal is set manually)
1: Invalid
2: Valid (when using
RADF only)
1
484
Laser
Polygonal motor rotational
status switching at the Auto
Clear Mode
ALL
0
<0-1>
SYS
Sets whether or not
switching the polygonal
motor from the normal
rotation to the standby
rotation at the Auto
Clear Mode.
0: Valid
1: Invalid
1
485
Laser
Rotational status of polygo-
nal motor on standby
ALL
0
<0-1>
SYS
Sets the rotational sta-
tus of polygonal motor
on standby.
0: Rotated (The rota-
tional speed is set at
08-490.)1: Stopped
1
Setting mode (08) <e-STUDIO352/353/452/453>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM
Contents
Pro-
cedur
e
07/11