background image

4.Using the IP Fax Function

84    Using the IP Fax Function from TopAccess

Setting up Job Notification Events

You can select jobs to be notified.

IP Fax Received Forward (Admin)

You can forward received IP Faxes to a specified destination. 
Access TopAccess. Run the access policy mode and click the [Administration] tab > [Registration] menu > [IPFax 
Received Forward] submenu.
For details, see the 

TopAccess Guide

.

 P.84 “Setting up Document Print (IP Fax Received Forward)”

 P.85 “Setting up Destination Setting (IP Fax Received Forward)”

 P.86 “Setting up InternetFax Setting (IP Fax Received Forward)”

 P.87 “Setting up Save as file Setting (IP Fax Received Forward)”

 P.92 “Setting up Email Setting (IP Fax Received Forward)”

 P.96 “Setting up Box Setting (IP Fax Received Forward)”

Setting up Document Print (IP Fax Received Forward)

You can configure printing of forwarded documents.

Item name

Description

1

Received Fax/InternetFax/
IPFax

Selects to send Email when an error occurs or when job is completed.

2

IPFax Received Forward

Selects to send Email when an error occurs or when job is completed.

Item name

Description

1

Document Print

Always

 — Select this to always print forwarded document.

ON ERROR

 — Select this to print the received document when an error 

occurred on all forwarding destinations. (For example, the document is not 

printed when the E-mail transmission only failed in a combined setting of 

Save as File and E-mail.)

1

2

1

Summary of Contents for e-STUDIO A Series













































































































Reviews: