e-STUDIO167/207/237
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
SCANNER
6 - 22
[F]
Platen sensor (S2)
(3)
Release 2 latches, take off the CIS home
position sensor, release the harness from
harness clamp and disconnect 1 connector.
Fig. 6-24
(1)
Take off the scanner top cover.
"
P.6-18 "[B] Scanner top cover"
(2)
Remove 1 screw and take off the sensor with
the bracket.
(3)
Disconnect 1 harness clamp and 1 connec-
tor.
Fig. 6-25
(4)
Release 2 latches and take off the platen
sensor.
Fig. 6-26
CIS home position sensor
Connector
Bracket
Connector
Platen sensor