8
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO167/207/237
LASER OPTICAL UNIT
8 - 7
8.5
Disassembly and Replacement
[A] Laser optical unit
(1)
Take off the rear cover.
"
P.2-22 "[J] Rear cover"
(2)
Disconnect 3 connectors from the MAIN
board.
Note:
Connect the flat harness to the MAIN board
with its erectrode side down. An error “CA2“
will be displayed if the connection is incor-
rect.
Fig. 8-10
(3)
Take off the switching regulator unit.
"
P.2-26 "[E] Switching regulator unit (PS)"
(4)
Remove 1 screw.
(5)
Pull out the laser optical unit while lifting it up
and take it off.
Fig. 8-11
Connector
Connector
Laser optical unit