10
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO167/207/237
PAPER FEEDING SYSTEM
10 - 17
(3)
Take off the bypass pickup clutch with its
shaft.
Fig. 10-26
(4)
Remove 2 E-rings. Then remove the gear,
cover, spring and cam out of the shaft.
Fig. 10-27
Note:
When assembling the bypass pickup clutch,
be sure to adjust the position of the hook of
the spring and cover so that the center slit of
the cover and the center of the cam are
aligned.
Fig. 10-28
Bypass pickup clutch
Cam
E-ring
E-ring
Gear
Shaft
Spring
Cover
Hook
Cam
Cover
Spring