e-STUDIO167/207/237
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
10 - 22
[N] Pickup solenoid (SOL1)
(3)
Release the harness from the harness
clamp, disconnect 1 connector and take off
the registration roller clutch.
Fig. 10-38
(1)
Take off the rear cover.
"
P.2-22 "[J] Rear cover"
(2)
Release the harness from the harness clamp
and disconnect 1 connector.
Fig. 10-39
(3)
Remove 1 screw and take off the pickup
solenoid bracket.
Note:
Be sure not to drop the bushing.
Fig. 10-40
Registration roller clutch
Connector
Harness clamp
Connector
Pickup solenoid bracket
Screw
Bushing