10
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO167/207/237
PAPER FEEDING SYSTEM
10 - 25
[Q] Registration roller (metal)
[R] Feed gear unit
(1)
Take off the Process unit.
"
P.11-9 "[A] Process unit"
(2)
Take off the transfer unit.
"
P.11-17 "[N] Transfer unit"
(3)
Take off the registration roller clutch.
"
P.10-21 "[M] Registration roller clutch
(CLT1)"
(4)
Remove 1 clip, 1 bushing and then take off
the registration roller (metal) while sliding it to
the rear side.
Fig. 10-47
(5)
Remove 1 bushing, 1 E-ring and then take
off 1 gear and 1 pin.
Fig. 10-48
(1)
Take off the main motor drive unit.
"
P.9-7 "[C] Main motor drive unit"
(2)
Take off the registration roller clutch.
"
P.10-21 "[M] Registration roller clutch
(CLT1)"
(3)
Take off the pickup solenoid bracket.
"
P.10-22 "[N] Pickup solenoid (SOL1)"
(4)
Remove 2 screws, and then take off the feed
gear unit.
Fig. 10-49
Registration roller (metal)
Clip
Bushing
Registration roller (metal)
Pin
Bushing
Gear
E-ring
Feed gear unit