11
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO167/207/237
DRUM RELATED SECTION
11 - 17
[N] Transfer unit
Note:
When taking off the transfer unit, take off the process unit first to prevent the drum from light.
(5)
Remove the terminal and spring. Then take
off the transfer charger wire.
(6)
Remove the cushioning material, disconnect
the terminal and remove the spring. Then
take off the separation charger wire.
Notes:
1. Insert the wire securely into the V-
grooves of the front and rear sides.
2. Do not twist the wire.
3. Do not touch the wire directly with bare
hands.
Fig. 11-28
(1)
Open off the ADU cover.
(2)
Take off 2 guides.
Fig. 11-29
(3)
Take off the transfer unit while pulling the
lever.
Fig. 11-30
Separation charger wire
Transfer charger wire
Cushioning material
Spring
Terminal
Guide
Transfer unit