e-STUDIO167/207/237
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
14 - 12
14.7 Disassembly and Replacement
[A] Automatic Duplexing Unit (ADU)
(1)
Take off the right rear cover.
"
P.2-22 "[I] Right rear cover"
(2)
Remove 1 screw and 1 ground wire.
(3)
Disconnect 1 connector.
Fig. 14-8
(4)
Open the transfer unit and release the ADU
stopper.
(5)
Take off the ADU cover while sliding it toward
the right.
Fig. 14-9
(6)
Remove 4 screws and take off the ADU.
Note:
When installing the ADU, be sure to put the
ADU stopper on the rear side through the
rear slit of the ADU.
Fig. 14-10
Ground wire
Connector
ADU stopper
Slit
ADU stopper
ADU