2
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO167/207/237
OUTLINE OF THE MACHINE
2 - 21
[G] ADU cover
[H] Right front cover
(1)
Open the bypass tray.
(2)
Open the ADU cover.
(3)
Open the transfer unit and release the ADU
stopper on the front side.
(4)
Remove 1 screw and take off the ADU stop-
per on the rear side.
Note:
Be careful not to fall off the ADU cover when
the screws are removed from the ADU stop-
per.
Fig. 2-18
(5)
Take off the ADU cover while sliding it toward
the right.
Fig. 2-19
(1)
Take off the front cover.
"
P.2-18 "[A] Front cover"
(2)
Open the ADU cover.
(3)
Pull out the drawer.
(4)
Remove 2 screws and take off the right front
cover.
Fig. 2-20
ADU stopper
ADU stopper
ADU cover
Right front cover