2
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO167/207/237
OUTLINE OF THE MACHINE
2 - 33
(6)
Take off the rear cover.
"
P.2-22 "[J] Rear cover"
(7)
Disconnect 1 connector (optional damp
heater). Release the harness from the har-
ness clamp.
Fig. 2-49
(8)
Take off the drawer of the equipment and
PFU drawer.
Fig. 2-50
(9)
Remove 1 screw and take off 1 fixing bracket
on the front left side.
Fig. 2-51