4
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO167/207/237
GENERAL OPERATION
4 - 7
(B) Pick-up failure in bypass
•
When paper becomes almost empty as they fed out during copying,
%
The tray-up sensor is turned OFF.
%
The tray-up motor is turned ON – the tray is raised.
%
The tray-up sensor is turned ON.
%
The tray-up motor is stopped.
•
When the paper empty sensor is turned OFF even if the tray-up sensor is ON during copying,
#
The sensor is detecting that no paper exists.
#
The lamp on the control panel corresponding to the drawer blinks (When the drawer is
selected)
#
Copying is stopped
•
During bypass feeding
Bypass pickup solenoid ON
#
Registration sensor is not turned ON in a fixed period of time
#
“Misfeed in bypass“ is displayed : E12
#
Copying operation is disabled
#
Solution: The bypass paper sensor is turned OFF by removing the paper from the bypass tray.