Toshiba e-studio182 Operator'S Manual Download

Page: 146 / 230

5 CHANGING EQUIPMENT’S SETTINGS

144 Department Code

Enter the department name, and then press the [ENTER] button.

Enter the department name only when the External Keyboard (optional) is installed.

A maximum of 20 desired letters can be set for the department name.

The department name entry can be omitted. In this case, do not enter the department
name and just press the [ENTER] button.

For how to enter letters, see the manual which comes with the Fax Kit or Scanner
Upgrade Kit (both optional).

Key in the department code, and then press the [ENTER] button.

Enter 5 digits for the department code. Entered digits are displayed as asterisks (*).

Department codes already registered cannot be keyed in.

The screen returns to the one in step 9.

Press the [USER FUNCTIONS] button or

(copy mode) button.

The screen returns to the “copy mode” main screen.

DEPARTMENT CODE
DEPARTMENT NUMBER:

ENTER DEPARTMENT NAME(MAX20):

DEPARTMENT CODE
DEPARTMENT NUMBER:

ENTER DEPARTMENT CODE:

****

Summary of Contents for e-studio182







































































































































































































































Search results

Summary of Contents for e-studio182

Reviews:

Related manuals for e-studio182

Brands by name

Popular brands

Toshiba e-studio182, Operator'S Manual

Search results

Summary of Contents for e-studio182

Reviews:

Related manuals for e-studio182

Brands by name

Popular brands