3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-21
For Mac
Open the print dialog box. Enable the “Print Mode” - “Distinguish Thin Line” option.
After changing the setting on the printer driver menu, print the image and check its image quality.
You can make thin lines thicker at the following codes when the “Distinguish Thin Line” checkbox is
selected.
• The unit of the setting value is the number of dots (line thickness). Lines thinner than the setting value
will become thicker as specified.
• Set the value while checking the print image until the optimum value is obtained.
Caution after the adjustment
Nothing in particular
Resolution
Color mode
[05] Code
Recommended
value
Acceptable
value range
Default
600 dpi
Common for Color
and Black
8240
Set a value larger
than 2.
1 to 9
2
1200 dpi
Common for Color
and Black
8241
Set a value larger
than 2.
1 to 9
2
Mac
Summary of Contents for e-STUDIO2010AC
Page 1: ...File No SME18003400 R180821V5800 TTEC Ver00F_2018 10 ...
Page 6: ...Revision Record Ver00 2018 10 19 Page Contents All Initial release ...
Page 339: ......
Page 340: ......