3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-37
• The features for each image type are as below.
• For details on how to use the Advanced mode, refer to "3.13 To Use ICC Profile".
(4)
Select the resolution.
• In the PS printer driver, you can select the resolution for printing each image type. Select this in
“Resolution” in the “Basic” tab from “Setting”.
• The features for each resolution are as below.
1200 dpi: Originals containing lots of thin lines and text (CAD drawing, etc.) and images
containing lots of lines (graphs, etc.)
600 dpi: Originals in which priority is to be given to the color or gradation when printing
(photographs, design drawings, etc.)
Caution after the adjustment
Nothing in particular
Color mode
Image Quality
Type
Features
Suitable original
Full color
General
Text, photographs and graphics are
printed clearly in a balanced manner.
• Contains text,
photos and graphics
Photograph
Priority is given to the reproducibility of
the low/middle density for photographs
and gradation. Printing can be made in
a similar color tone to a monitor with
sRGB specified.
• Photograph
Presentation
Priority is given to the reproducibility of
vivid colors. The color tone does not
match that on the monitor, because
printing is performed in highly vivid
colors.
• Presentation
materials
• Contains text and
illustrations
Line art
Priority is given to the reproducibility of
thin lines. The color tone is similar to
that for “General”; however, smudges
on the reproduction of black will be
suppressed more than that for
“General”.
• Contains text,
photos and graphics
• Drawings
• Barcodes
Advanced
Printing is performed in the Advanced
mode.
• Contains text,
photos and graphics
• Photograph
Twin Color
-
Text, photographs and graphics are
printed clearly in a balanced manner.
• Contains text,
photos and graphics
Black
-
Text, photographs and graphics are
printed clearly in a balanced manner.
• Contains text,
photos and graphics
PS
Summary of Contents for e-STUDIO2010AC
Page 1: ...File No SME18003400 R180821V5800 TTEC Ver00F_2018 10 ...
Page 6: ...Revision Record Ver00 2018 10 19 Page Contents All Initial release ...
Page 339: ......
Page 340: ......