3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-113
3.13.4
To Print Using Custom RGB Profiles
Explanation
In the service tool (e-BRIDGE Color Profile Tool V3.0), RGB source ICC profiles which meet the specific
color reproduction can be created.
By using this created profile, printing with a specific color reproduction is possible.
Procedures
• Only the service technician must perform step (1).
• Both the service technician and the user can perform steps (2) or later.
(1) Create the RGB source ICC profile for the desired color reproduction using e-BRIDGE Color Profile Tool
V3.0.
(2) Access TopAccess and open the “Administration” tab menu. Then upload the desired RGB source
profile.
Follow (a) to (g) below to upload the profile.
(a) Access TopAccess and open the “Administration” tab menu.
(b) Open the “Setup” menu and the “ICC Profile” sub menu.
PS
XPS
PS
XPS
Summary of Contents for e-STUDIO2010AC
Page 1: ...File No SME18003400 R180821V5800 TTEC Ver00F_2018 10 ...
Page 6: ...Revision Record Ver00 2018 10 19 Page Contents All Initial release ...
Page 339: ......
Page 340: ......