4.e-Filing-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
© 2018 TOSHIBA TEC CORPORATION All rights reserved
4-14
Explanation
When an image is scanned stored in the e-Filing box (Scan to Box) in the Full color or the Auto Color
mode, and printed as it is (without the printing image mode set), printing may be performed with image
processing not suitable for the image, and the user may not obtain the desired image quality. To finely
print a full-color image scanned and stored, select the printing image mode (General/Photograph/
Presentation/Line Art) suitable for the image. Then, printing can be performed with image processing
optimal for the image, in the same manner as printing on the printer driver.
Procedures
• Perform the adjustment in accordance with the procedures below.
• Both the service technician and the user can perform procedures (1) to (3).
• Only the service technician must perform procedures (4).
* This adjustment will have an effect only on the image stored in the Full color mode (including the Auto Color mode).
(1) Scan the full-color image and store it in the e-Filing box.
For further information regarding how to scan and store images, refer to the Operator’s Manual for
e-Filing Guide and Scanning Guide.
(2) Select a printing image mode suitable for the stored image.
Use steps (a) to (c) to change the printing image mode.
(a) Press [User Functions -User-] on [Home] screen to enter the “User Functions” menu.
(b) Press [e-Filing].
(c) Press the button for the mode suitable for the image.
• For further information regarding the features of each printing image mode, refer to the
explanation of the “The features for each image type” options in Procedure (3) of "3.2 To Make
Print Suitable for the Original"
<Note>
• A change to the printing image quality mode will apply to all future printouts using the e-Filing box.
Carefully perform the adjustment while printing out images other than the one that is used for the
adjustment.
(3) Print out the image stored in the e-Filing box on the Control Panel or using the e-Filing Web utility.
For further information regarding how to print it out, refer to the Operator’s Manual for e-Filing
Guide.
Scan to Box
Scan to Box
Scan to Box
Summary of Contents for e-STUDIO2010AC
Page 1: ...File No SME18003400 R180821V5800 TTEC Ver00F_2018 10 ...
Page 6: ...Revision Record Ver00 2018 10 19 Page Contents All Initial release ...
Page 339: ......
Page 340: ......