5.Scanning-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
5-13
Procedures
• You can start with any of the procedures. But it is recommended to perform the procedures in order, as
listed below. You can perform one procedure in conjunction with another. But if this changes the image
quality more than required or loses the effectiveness of the adjustment, restore the settings made in
the previously performed procedure to the original ones. Then perform other procedures.
• Both the service technician and the user can perform procedure (1).
• Only the service technician must perform procedure (2).
(1) When scanning the original, press [Scan Setting] on the Control Panel. Press [+] to increase the
sharpness intensity.
After increasing the sharpness intensity, scan the original and check the scanned-in image quality.
With the sharpness intensity set to the maximum, if further image quality adjustments are still
necessary, the service technician must perform the next procedure.
(2) Select [05 ADJUSTMENT MODE]. Change the values for codes [7430 to 7433],[7470], [8335],
[8336], [8354] and [8375] to adjust the sharpness intensity.
• Setting “0” provides the softest image, while setting “255” provides the sharpest image.
Caution after the adjustment
The adjustment may possibly cause moiré. In addition, when text and thin lines in a light-colored
background are scanned, the background around the text or line may be eliminated. Therefore, carefully
perform the adjustment, while checking the scanned-in image.
Color mode Original mode [05] code
Recommended value
Acceptable
value range
Default
Black
Text/Photo
05-7430
Set a value larger than 128.
0 to 255
128
Text
05-7431
Photo
05-7432
User Custom
05-7470
Full color
Text/Photo
05-8354
Text
05-8335
Photo
05-8336
User Custom
05-8375
Gray scale
---
05-7433
Summary of Contents for e-STUDIO2010AC
Page 1: ...File No SME18003400 R180821V5800 TTEC Ver00F_2018 10 ...
Page 6: ...Revision Record Ver00 2018 10 19 Page Contents All Initial release ...
Page 339: ......
Page 340: ......