6
Specifications of Equipment
71
Recommended paper for each media type
Media Type
Toshiba recommendations/Manufacturer
Weight
PLAIN
A/B format: ColorCopy/mondi
LT format: Laser Print/Hammermill, Color Copy Paper/Hammermill
90 g/m
2
, 24 lb. Bond
100 g/m
2
, 28 lb. Bond
THICK1
A/B format: ColorCopy/mondi
LT format: Laser Print/Hammermill, Color Copy Paper/Hammermill
120 g/m
2
, 32 lb. Bond
160 g/m
2
, 60 lb. Cover
THICK2
A/B format: ColorCopy/mondi
200 g/m
2
A/B format: 3478/ZWECK-AVERY
*3
LT format: 5165/AVERY
*3
—
THICK3
A/B format: ColorCopy/mondi
LT format: Color Copy Cover/Hammermill
220 g/m
2
, 80 lb. Cover
250 g/m
2
THICK4
A/B format: ColorCopy/mondi
LT format: Color Copy Cover/Hammermill
280 g/m
2
, 100 lb. Cover
SPECIAL1
A/B format: Water Proof Paper Duplex
*4, *5, *6
LT format: Weather Resistance Paper
*4, *5, *6
230 g/m
2
SPECIAL2
AquaAce
*6
230 g/m
2
TRANSPARENCY
*1
A/B format: BG72/FOLEX
LT format: CG3700/3M
—
ENVELOPE
*2
COM10/Westvaco Columbian CO138/Westvaco
Monarch/Mailwell No.553/Mailwell
—
*1 Only Toshiba-recommended OHP film should be used. The use of any other film may cause a malfunction.
*2 Printing on the back side of an envelope is possible only when the envelope is not a self-sealing one.
*3 Only Toshiba-recommended sticker labels should be used.
*4 This type of paper is available for automatic duplex copying (A4/LT or smaller sizes are recommended).
*5 Place the sheets one by one on the bypass tray.
*6 Remove the copied paper from the receiving tray sheet by sheet. Remove the copied paper from the tray of the Finisher whenever 10 sheets of
paper have been stacked.
Paper only acceptable for printing functions
Feeder
Media type
Weight
Maximum sheet capacity
Paper size
Bypass tray
PLAIN
90 - 105 g/m
2
24 - 28 lb. Bond
1 sheet
*1, *2
305 mm x 1200 mm
(12.00" x 47.24")
THICK1
106 - 163 g/m
2
- 90 lb. Index
*1
Place the sheets one by one on the bypass tray.
*2
When the Finisher is installed, the receiving tray of the equipment cannot be used for paper exiting. The upper receiving tray of the installed
Finisher, the upper receiving tray of the installed Saddle Stitch Finisher or upper receiving tray of the installed Inner Finisher can be used for
paper exiting.
*16 The printed image may be faint if you print in the area within approximately 4 mm (0.16”) from the edges of 305 mm wide paper.
*17 The printed image may be faint if you print in the area within approximately 11.5 mm (0.45”) from the edges of 320 mm wide paper.
