1
2
3
4
5
6
7
8
9
10
11
12
5-27
Setting RX Printing
Set printer settings for when originals received on the FAX are printed.
Two print installations are available: discard printing and RX reduction printing.
• Discard Printing : ON, OFF
ON (initial setting)
: If the received original is longer than the recording paper by 10mm, the
excess data for the received original will be discarded.
OFF
: The received original is printed on two sheets of paper if its length exceeds
the paper printing area.
* For detail of DISCARD setting, contact your service technician.
• RX Reduction Printing : ON, OFF
ON (initial setting)
: If the received original is longer than the recording paper, it will be vertically
reduced to 90% to fit on the installed recording paper.
OFF
: The received original is printed on two sheets of paper if its length exceeds
the paper printing area.
* Cassettes can be set for received FAX printing only.
Page 1-11 in the Operator’s Manual for Copy-
ing Functions
Be sure to use LD, LG, LT, LT-R, A3, A4, A4-R or B4.
1
Press SETTINGS key to display the settings menu,
then the PRINTER key.
2
Press the ON (or OFF ) key of the DISCARD and/
or REDUCTION, then the SET key.
• The registered items can be confirmed in the function list.
Page 5-38
#05-24_Entering and Setting.p65
9/30/00, 1:43 PM
27
Summary of Contents for e-STUDIO35
