background image

6.INTERNET FAX

Sending Internet Faxes    89

6 INTERNET FAX

6

Specify the following items as required, and then press [OK].

y

[SUBJECT]

Press this button to enter the subject of the Internet Fax to be sent.

y

[BODY]

Press this button to enter the body message of the Internet Fax to be sent.

y

Pressing each button displays an on-screen keyboard. Enter each item using the keyboard and digital keys, 
and then press [OK] to set the entry.

y

The administrator can change the body message from TopAccess. For details, refer to the 

TopAccess 

Guide

.

All the settings required for Internet faxing are mentioned in the above steps. Settings other than the above 
apply only to fax transmissions.

7

Specify the e-mail addresses that you want to send to, and then press [SEND] or the 
[START] button.

You can specify e-mail addresses in various ways. For details, see the following section:

 

 P.46 “Specifying E-mail Addresses”

y

You can save the sent data as a file.

 

 P.90 “Saving sent data as a file (Internet Fax and File)”

y

You can also set advanced functions, such as 2-sided Scan and Priority Reserve.

 

 P.94 “Setting advanced functions”

Summary of Contents for e-STUDIO455 Series













































































































Reviews: