3
Replacing Waste Toner Box
When “Dispose of used toner” appears on the touch panel, replace the waste toner box according to the following
procedures.
Replacing Waste Toner Box
37
1
Open the front cover of the Finisher, pull the knob
to unlock the Finisher, and then separate the
Finisher.
2
Open the waste toner box cover and remove the
waste toner box.
3
Screw the lid on the opening of the waste toner
box.
4
Set a new waste toner box and close its cover.
5
Close the front cover of the Finisher and connect
the Finisher to the equipment.
Never attempt to incinerate waste toner boxes.
Dispose of used toner cartridges and waste toner boxes in accordance with local regulations.
The knob of step 1 is inside the cover of the Hole Punch
Unit when it is installed.