Getting Connected
User's Manual
7-4
TOSHIBA Pocket PC e750
Version
1
Last Saved on 02/05/2003 17:16
ENGLISH using Euro_M.dot –– Printed on 02/05/2003 as HDA51PX1T80
To create an Ethernet connection to an ISP:
1.
You do not need to create a new connection on your device. Instead,
you must purchase and configure an Ethernet card that is compatible
with your device.
2.
Obtain the following information from your ISP: user name, password,
and domain name.
3.
Insert the Ethernet card into your device. For instructions on inserting
and using the Ethernet card, see the owner’s manual for the card.
4.
The first time you insert the card,
Network Settings
will appear
automatically so that you can configure the network card. If it does
not appear, or to change settings later, tap
>
Settings
>
Connections
tab >
Connections
>
Advanced
tab >
Network Card
.
5.
If you need to enter specific server information, tap the appropriate
adapter. Most networks use DHCP, so you should not have to change
these settings unless your network administrator instructs you to do
so.
6.
If necessary, connect the network card to the network by using a
network cable. For information, see the documentation that came with
your network card.
To start a connection, insert the network card, and begin using a desired
program. For example, switch to Pocket Internet Explorer and browse to
a Web page. Your device will automatically begin connecting.
Connect to Work
If you have access to a network at work, you can send e-mail messages,
view intranet pages, synchronize your device, and possibly access the
Internet. You can connect to work in one of two ways:
Create a modem connection by using a RAS account. Before you can
create this modem connection, your network administrator will need
to set up a RAS account for you. If this is the method you want to use,
see “To create a modem connection to a network.” Your network
administrator may also give you VPN settings.
Use an Ethernet card and a net tap to connect to the network. If this is
the method you want to use, see “To create an Ethernet connection to
a network.”
To create a modem connection to a network:
1.
Get the following information from your network administrator: dial-up
access telephone number, user name, password, domain name, and
TCP/IP settings.
2.
If your device does not have a built-in modem, install a modem card.
3.
Tap
>
Settings
>
Connections
and then tap
Connections
.
4.
In
My Work Network
, tap
Add a new modem connection
, and fol-
low the instructions in the New Connection wizard.
5.
Enter a name for the connection, such as your company's name.
