Bluetooth
User's Manual
9-8
TOSHIBA Pocket PC e750
Version
1
Last Saved on 02/05/2003 17:16
ENGLISH using Euro_M.dot –– Printed on 02/05/2003 as HDA51PX1T80
Using COM Service
Establishing an ActiveSync connection with a computer
This section explains how to use COM service to connect to a computer.
Preparations
The computer to which you want to connect must be Bluetooth
enabled and have ActiveSync installed. Your Toshiba Pocket PC must
also have been synchronized with the PC using a cradle or a cable at
least once to establish a "partnership' to the PC.
1.
From the service list on the Bluetooth Settings screen, tap and hold
on the name of the COM service to which you want to connect, then
tap
ActiveSync Registration
or
Connection Registration
on the
popup menu.
If you select
ActiveSync Registration
, ActiveSync will be performed
automatically and continuously. You need no more step.
When the connection registration is complete, the device and service
icons change to registered connection icons.
2.
Tap
OK
.
The screen closes and the Today screen appears.
3.
From the computer, set the port that you will use when you are
connecting with Bluetooth.
The computer is now ready to connect.
This operation may vary depending on the computer. Please refer to
the user's guide supplied with your computer for more information.
4.
Tap
Start
>
Programs
>
Bluetooth
Connection
.
Your Toshiba Pocket PC connects to the computer.
When the connection is complete, the Programs screen reappears.