Use
To
Color Correction
Auto
Off
Manual
Adjust the color output on the printed page.
Note:
Auto is the factory default setting.
Print Resolution
1200 dpi
4800 CQ
Specify the output resolution in dots per inch (dpi) or in color quality (CQ).
Note:
4800 CQ is the factory default setting.
Toner Darkness
1–5
Lighten or darken the output.
Note:
4 is the factory default setting.
Enhance Fine Lines
On
Off
Enable a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts.
Note:
Off is the factory default setting.
Color Saver
On
Off
Reduce the amount of toner used for graphics and images.
Notes:
•
Off is the factory default setting.
•
On overrides the Toner Darkness setting.
RGB Brightness
‑
6 to 6
Adjust the brightness of the output.
Note:
0 is the factory default setting.
RGB Contrast
0–5
Adjust the contrast of the output.
Note:
0 is the factory default setting.
RGB Saturation
0–5
Adjust saturation in color outputs.
Note:
0 is the factory default setting.
Color Balance
Cyan
‑
5 to 5
Magenta
‑
5 to 5
Yellow
‑
5 to 5
Black
‑
5 to 5
Reset Defaults
Enable an equal balance of colors in the output.
Note:
0 is the factory default setting.
Understanding the printer menus
101
Summary of Contents for eS305CP
Page 125: ...2 Open the top door 3 Remove the toner cartridges Maintaining the printer 125 ...
Page 130: ...16 Insert the waste toner bottle 17 Insert the right side cover Maintaining the printer 130 ...
Page 134: ...2 Open the top door 3 Remove the toner cartridges Maintaining the printer 134 ...
Page 138: ...14 Insert the waste toner bottle 15 Insert the right side cover Maintaining the printer 138 ...
