Incorrect paper size, open [paper source] [34]
Note:
The paper source can be a tray or a feeder.
Try one or more of the following:
•
Load the correct size of paper in the paper source.
•
From the printer control panel, select
Continue
to clear the message and print using a different paper source. For
non
‑
touch
‑
screen printer models, press
to confirm.
•
Check the length and width guides of the paper source and make sure the paper is loaded properly.
•
Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
•
Make sure the paper size and type are specified in the Paper menu on the printer control panel.
•
Make sure that the paper size is correctly set. For example, if Multipurpose Feeder Size is set to Universal, then
make sure the paper is large enough for the data being printed.
•
Cancel the print job.
Insert Tray [x]
Insert the indicated tray into the printer.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
•
From the printer control panel, select
Continue
to stop the defragmentation and continue printing. For
non
‑
touch
‑
screen printer models, press
to confirm.
•
Delete fonts, macros, and other data from the printer memory.
•
Install additional printer memory.
Insufficient memory, some Held Jobs were deleted [37]
The printer deleted some held jobs in order to process current jobs.
Select
Continue
to clear the message. For non-touch-screen printer models, press
to confirm.
Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, select
Continue
to print the part of the job already stored and begin collating the
rest of the print job. For non
‑
touch
‑
screen printer models, press
to confirm.
•
Cancel the current print job.
Insufficient memory to support Resource Save feature [35]
Install additional printer memory or select
Continue
on the printer control panel to disable Resource Save, clear the
message, and continue printing. For non
‑
touch
‑
screen printer models, press
to confirm.
Troubleshooting
158
Summary of Contents for eS305CP
Page 125: ...2 Open the top door 3 Remove the toner cartridges Maintaining the printer 125 ...
Page 130: ...16 Insert the waste toner bottle 17 Insert the right side cover Maintaining the printer 130 ...
Page 134: ...2 Open the top door 3 Remove the toner cartridges Maintaining the printer 134 ...
Page 138: ...14 Insert the waste toner bottle 15 Insert the right side cover Maintaining the printer 138 ...
