Toshiba eS305CP User Manual Download

Page: 188 / 220

Action

Yes

Step 1

From the Quality menu on the printer control panel, select

Color

Adjust

Resend the print job.

Is the print still too light?

Go to step 2.

The problem is solved.

Step 2

From the Quality menu on the printer control panel, increase the toner
darkness.

Note:

4 is the factory default setting.

Resend the print job.

Is the print still too light?

Go to step 3.

The problem is solved.

Step 3

From the printer control panel, set the paper type, texture, and weight in
the Paper menu to match the paper loaded in the tray.

Is the tray set to the type, texture, and weight of the paper loaded?

Go to step 4.

Specify the paper type,
texture, and weight
from the tray settings
to match the paper
loaded in the tray.

Step 4

Depending on your operating system, specify the paper type, texture,
and weight from Printing Preferences or from the Print dialog.

Resend the print job.

Is the print still too light?

Go to step 5.

The problem is solved.

Step 5

Make sure that the paper has no texture or rough finishes.

Are you printing on textured or rough paper?

From the printer
control panel, set the
paper texture in the
Paper menu to match
the paper loaded in the
tray

Go to step 5.

Step 6

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store paper in

its original wrapper until you use it.

Resend the print job.

Is the print still too light?

Go to step 7.

The problem is solved.

Step 7

Replace the imaging kit, and then resend the print job.

Is the print still too light?

Contact

customer

support

The problem is solved.

Troubleshooting

188

Summary of Contents for eS305CP





























































































































































































































Search results

Summary of Contents for eS305CP

Reviews:

Related manuals for eS305CP

Brands by name

Popular brands

Toshiba eS305CP, User Manual

Search results

Summary of Contents for eS305CP

Reviews:

Related manuals for eS305CP

Brands by name

Popular brands