Toshiba eS305CP User Manual Download

Page: 47 / 220

•

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

Click

Settings

Paper Menu

Change the tray settings to specify the paper size and type for the tray.

•

To link trays, make sure the paper size and type for the tray match with that of the other tray.

•

To unlink trays, make sure the paper size or type for the tray

does not

match with that of the other tray.

Click

Submit

Warning—Potential Damage:

Paper loaded in the tray should match the paper type name assigned in the printer.

The temperature of the fuser varies according to the specified paper type. Printing issues may occur if settings are
not properly configured.

Creating a custom name for a paper type

Using the Embedded Web Server

Open a Web browser, and then type the printer IP address in the address field.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

Click

Settings

Paper Menu

Custom Names

Select a custom name, and then type a custom paper type name.

Click

Submit

Click

Custom Types

, and then verify if the new custom paper type name has replaced the custom name.

Using the printer control panel

From the home screen, navigate to:

Paper Menu

Custom Names

Select a custom name, and then type a custom paper type name.

Touch

Custom Types

, and then verify that the new custom paper type name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

Assign a custom paper type name to a tray when linking or unlinking trays.

Open a Web browser, and then type the printer IP address in the address field.

Loading paper and specialty media

Summary of Contents for eS305CP





























































































































































































































Search results

Summary of Contents for eS305CP

Reviews:

Related manuals for eS305CP

Brands by name

Popular brands

Toshiba eS305CP, User Manual

Search results

Summary of Contents for eS305CP

Reviews:

Related manuals for eS305CP

Brands by name

Popular brands