Use
To
Custom [x] Loading
Duplex
Off
Determine and set two
‑
sided printing for all print jobs that specify
Custom [x] as the paper type.
Note:
Custom [x] Loading is available only when the custom type is
supported.
Notes:
•
Duplex sets the printer default to two
‑
sided printing for every print job unless one
‑
sided printing is selected from
Printing Preferences or the Print dialog.
•
Off is the factory default setting for all the menus.
Custom Types menu
Custom Names menu
Use
To
Custom Name [x]
Specify a custom name for a paper type. This name replaces Custom Type [x] in
the printer menus.
Universal Setup menu
Use
To
Units of Measure
Inches
Millimeters
Identify the units of measure.
Notes:
•
Inches is the US factory default setting.
•
Millimeters is the international factory default setting.
Portrait Width
3–8.5 inches
76–216 mm
Set the width for portrait orientation.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
8.5 inches is the US factory default setting. You can increase the
width in 0.01
‑
inch increments.
•
216 mm is the international factory default setting. You can increase
the width in 1
‑
mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the width for portrait orientation.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
14 inches is the US factory default setting. You can increase the
height in 0.01
‑
inch increments.
•
356 mm is the international factory default setting. You can increase
the height in 1
‑
mm increments.
Understanding the printer menus
75
Summary of Contents for eS305CP
Page 125: ...2 Open the top door 3 Remove the toner cartridges Maintaining the printer 125 ...
Page 130: ...16 Insert the waste toner bottle 17 Insert the right side cover Maintaining the printer 130 ...
Page 134: ...2 Open the top door 3 Remove the toner cartridges Maintaining the printer 134 ...
Page 138: ...14 Insert the waste toner bottle 15 Insert the right side cover Maintaining the printer 138 ...
