FC-22
TROUBLESHOOTING
4 - 76
January 2000 © TOSHIBA TEC
Cause/Defect area
Step
Check items
Measures
Scanner/printer adjustment
defect
Registration roller
Paper feed motor
Pre-registration guide
1
Same dislocation on every copy?
2
Registration roller dirty, or spring out of
place?
3
Registration motor malfunctioning?
4
Paper feed motor malfunctioning?
5
Pre-registration guide mounted defec-
tively?
Adjust scanner/printer using adjustment mode.
Clean roller with alcohol.
Re-install spring.
Adjust or replace gears, etc. if they are not engaged
properly.
Check circuit or motor and replace them if neces-
sary.
Re-install guide.
(20) Image dislocation in feeding direction
F
eeding direction
Summary of Contents for FC22
